Waldorf Q Rack, Руководство пользователя

Страница: 119 / 174

Sound Parameters – Arpeggiator
119 Waldorf Q User’s Manual
never exceed the maximum MIDI velocity 127 or minimum MIDI velocity 1. This means when you
have already played the notes with a high velocity,
Arp Accent
might not be able to further offset it
positively, so you will only hear differences with negative accent offsets. Vice versa, low velocities
might not be able to be lowered by
Arp Accent . The only exception is
Í Í Í Í
. See the following
description.
• If
Í Í Í Í
is selected, the current step is actually played, but inaudible. This means that the note
list is advanced by one note, but you are not able to hear it. This feature is the opposite to
Arp Step
set to Off , which doesn’t generate any note and therefore doesn’t advance the
note list.
• If Ó Ó
Ó Ó
is selected, the velocity of the current step is not altered. The arpeggio steps are played
back with their original velocity.
• If
Arp Accent
is set to any positive or negative value, the velocity is raised or lowered
accordingly. Each step adds or subtracts 15 from the original velocity. The following table
gives an overview over all settings with a note that was originally played at velocity 64:
Arp Glide off /
˜
Arp Glide
01[˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ]
For each step in the arpeggio pattern you can activate the glide effect individually. This gives you the
ability to create the classic "Bass Line" melody character. Make sure that you set up a reasonable glide
effect in the Glide section.
• If off is selected (empty space), the glide effect is disabled for this step.
• If ˜ ˜
˜ ˜
is selected (legato symbol), the glide effect is enabled for this step. This means that the
previous note glides to the note that has to be played at this particular position in the
arpeggio.
���
Please note that
Glide Active
in the Oscillators section must be set to Off when you want to
set Arp Glide for individual pattern notes. Otherwise, the glide effect would be on all notes.
Arp Step
* * * *
/
- - - -
/
Ú Ú Ú Ú
/
Û Û Û Û
/
Ù Ù Ù Ù
/
ı ı ı ı
/
ˆ ˆ ˆ ˆ
Arp Step
01[*ˆ*ı**-*-ı*-ˆ*ˆ*]
This parameter can have a very strong effect on the resulting arpeggio, so you should read the
following paragraphs carefully.
Arp Step basically determines which note of the note list is played at
a particular step. You can also force the Arpeggiator to play a whole chord or part of a chord or set it
up to play a random note from the list.
• If
*
is selected (asterisk symbol), the Arpeggiator plays the step unaltered. The note list is
advanced beforehand, except when you press a new chord.
• If off is selected (empty space), the Arpeggiator plays nothing at this step position. When
Length
or
Steplen
is set to legato , the previous step that isn’t set to Off is still held to
create the legato effect. The note list is not advanced.
• If - is selected, the Arpeggiator plays the same note as it had to play in the previous step
that was set to
*
or
ˆ
. With this setting, you can repeat a particular note of the note list
several times. The note list is not advanced.