Walchem WebAlert WA500, Инструкция по эксплуатации

Страница: 45 / 52

42
5.19 Sub-Network
Once you have created a network of two or more WebAlert process monitors, purchased the Master
Capability software for the master process monitor, defined the master unit as the master and slave units
as slaves (see section 5.11) in the Communications page, and given each process monitor unique
Ethernet IP addresses in the Communications page, the links under Sub-Network will be active.
To navigate between process monitors on the sub-network, start by logging onto the master process
monitor. This may be via USB, Ethernet or modem. Once connected to the master, click on a link to the
slave. The link will be given the custom name of the process monitor from the Startup page. The first
time you connect to the slave in a given session, you will need to log on with that process monitor’s
user name and password. After that, you will be able to bounce from one process monitor to another
without logging on again.
If the links available do not accurately match the process monitors on the network, go to the
Communications page and click the “Detect Network” button. If the sub-network frame is still
inaccurate, right click in the frame and click ‘Refresh.’ If still inaccurate, try rebooting the process
monitor.