Walchem WebAlert WA500, Инструкция по эксплуатации

Страница: 22 / 52

19
4.4 Startup
Once the WebAlert has been set up for your application, start up is a simple process. Simply turn on the
power, and it will begin monitoring the process.
4.5 Shut Down
To shut down the process monitor, simply turn off the power. All set points will be retained in memory.
5.0 OPERATION
When you first access the process monitor, the System Summary page will be displayed in the main
frame of the browser, and the Name of the unit and Alarm Status will be displayed in the top frame.
Links to each main menu page are located along the left side of the screen.
The menu pages are grouped by inputs, outputs, and utilities. Each input has fields for defining the type
of input, selecting units of measure, etc. as required. The alarm output has menus for selecting the types
of errors that will trigger the relay, cell phone text message or email notification. The utilities allow you
to set up the data logging, auto-reporting, access codes, communications, etc.
5.1 Menu Selection Links
Along the left side of your PC monitor will be links to the various menu pages.
Below is a list of all possible Menu selections.
Startup
System Summary
Analog Inputs
4-20 mA Inputs
4-20 mA Calibration
Digital Inputs
Flowmeter
Generic Inputs
Generic Counters
Digital Inputs
Outputs
Alarm
Utilities
System Auto Report
Datalog Auto Report
Manual Datalog
Graphing/Trending
Communications
Software Upgrade
Configuration File
Notepad
Access Codes
WebAlert Help
Walchem Home Page