13
AQUA BLADE TRIMMER
■
SELF-SHARPENING BLADES
are made to maintain their
shape and sharpness for extended periods.
CLEANING AND MAINTENANCE
BLADE CARE
After each use, whisk away any loose hairs from the unit and
blades using the cleaning brush. For units with a soft touch grip,
use a damp cloth to wipe down the body of the trimmer, taking care
not to get the blades wet. Store unit in such a manner so that the
blades are protected from damage. When the trimmer is not in use,
the trimmer guide/blade guard attachment should be in place to
protect the blades.
Trimmer blades have precision-hardened and ground cutting teeth.
Blades should be handled carefully and never bumped or used to
cut dirty or abrasive material. Clean with the included brush.
Blades can also be rinsed clean.
OILING BLADES
For best results, put one or two drops of WAHL Clipper Oil on the
blades only when necessary, or approximately once a month.
Motor bearings are permanently lubricated—do not attempt to oil.
When oiling your trimmer, turn the trimmer
“ON,” hold the unit with the blades facing
DOWN and squeeze one or two drops of oil
onto the blades.
Wipe off excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will
cause damage if allowed to seep back into motor.
BLADE CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk
any loose hairs from the unit and the blades. Store unit in such a
manner so that blades are protected from damage.
This appliance should be stored in a manner where it is
not subjected to crushing, heating above 100°C (212°F), or
incineration.
