11
AQUA BLADE TRIMMER
Begin with a guide of a long trimming length.
Trim toward your chin in smooth, overlapping
strokes, following the lay of your beard. If you
trim against the way your beard naturally lays,
the trimmer will cut the hair much shorter.
Change the trimming guides to progressively
shorter lengths until you reach the desired
length of beard. You may wish to trim closer
near the ear and down under the chin,
changing to a longer guide toward the front of the face and
point of your chin.
3. To cut the outline of your beard, remove the trimming guide.
Starting under your chin and working back toward your
jawbone and ears, cut the outer perimeter of your beard
underneath the jawbone. Continue the line all the way up to
the ears and hairline.
4. Accentuate your beard line by using the trimmer in a
downward motion. Start at the line you’ve created and,
working from the chin back toward the ears, trim the area
right under your beard line.
5.
Define the upper part of your beard using the same
technique.
BODY GROOMING
The following are suggested steps and head choices. You may find
different procedures work better for you.
1.
If starting with full growth hair, first use the trimmer head with
the rounded #1 or #1/2 guide comb to trim hair to a short
length.
2. Remove the guide comb, and go back over areas where a
shorter cut is desired. Use care in sensitive areas to avoid
cuts in loose skin.
3.
If a smooth finish is desired, remove the blade, and attach the
all-body shaver (if included). Go over desired areas taking
smooth strokes.
