9
AQUA BLADE TRIMMER
OPERATING INSTRUCTIONS
RECHARGING
The trimmer cannot be overcharged, so you may charge it
as often as desired. However, periodic recharging of the trimmer,
rather than continuous recharging, will prolong battery life.
Charge when trimmer seems to lose power or run slower. The
charging LED will pulse while charging. LED will remain lit after
charging is complete.
1. This trimmer is conveniently designed for household use. It
should be allowed to charge completely for 60 minutes before
its first use.
2. Remove the trimmer, recharging transformer and accessories
from the packing material.
3. Connect the transformer to the trimmer. BE SURE TRIMMER
IS IN THE “OFF - 0” POSITION WHEN CHARGING.
4. Plug the recharging transformer into any convenient electrical
outlet at the correct voltage. LED will remain lit after charging
is complete.
5. When trimmer is low in power, it should be connected to the
transformer and plugged into an outlet to assure maximum
power is available when it is next used. This transformer
is designed to completely charge the battery without
overcharging.
Do not use the trimmer while it is charging.
6. The battery will take approximately 60 minutes to charge. The
Lithium Ion Trimmer also has quick charge capability.
7. Insert only recharging transformer plug supplied by the
manufacturer into charger receptacle.
TRAVEL LOCK
The Wahl 9899 trimmer comes with an electronic travel lock to
avoid accidental activation while transporting.
Hold power button down for 5 seconds to engage travel lock.
Hold power button down for 5 seconds to disengage travel lock.
NOTE:
Plugging in power cord while locked will deactivate
the travel lock.
