14
AQUA BLADE TRIMMER
TROUBLESHOOTING
•
If the trimmer unexpectedly stopped operating try resetting the
device by plugging the trimmer into the charger.
•
If your trimmer does not seem to take a charge, check the
following before returning it for repair:
1. Check outlet to make sure it is working by plugging in another
appliance.
2. Make sure the outlet simply is not connected to a light switch
which turns the power at the outlet off when lights are turned
off.
3. Be sure the trimmer is properly connected to the recharging
transformer, all connections are secure and the switch on the
trimmer is turned “OFF - 0.”
4. If your electricity is connected to a master power switch, we
suggest the trimmer be disconnected from the charger anytime
the master switch is off. Leaving the unit plugged into a dead
outlet or an unplugged charger will drain the battery.
5. If trimmer does not run and it is completely charged, turn the
unit “ON - I” and pinch or push the blades manually. (Oil may
have dried out between the blades, so they may be temporarily
stuck together.)
WIRING
WARNING: If the transformer is damaged it must be replaced
in order to avoid hazard. This product must only be used with
the transformer supplied. Should a replacement be required,
please contact WAHL customer services on
01227 740066.
