Domestic Appliances and Personal Care
Service
Service
Service
QUADRA ACTION
HQ 6890/A
Shaver
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification
©
99/12
4322 277 00145
PCS 104 742
HINTS FOR REPAIRS
-
-
-
-
-
-
-
GENERAL
Remove the shaving unit, to prevent damages
during repairs.
Remove screws A1 (2x, of which 1 is under
trimmer slide).
Take cover with trimmer from housing.
Remove bracket (14 + 21).
The PC-board can now be removed from the
housing.
Remove screws B1 (2x) the motor and hair-
chamber can now be removed from the housing.
Detach the motor clamping spings (item 17)
on the bearing block with a small screwdriver.
• Mainsshaver possible.
• Converts input voltage 8-16V dc to constant
Charge current (NiHH 1100mA, NiCD 680mA)
or Constant motorvoltage at mainsshave.
Start-up voltage min. 11V.
• Open battery protection.
• Undervoltage protection.
• Temperature protection of battery (only NiMH).
• Charge condition of battery is managed by
microcontroller. Charge current is regulated and
discharge currents is measured.
• Charge condition of battery shown on LCD display
(minutes left) with backlighting. Full indication
with flashing (2Hz) of backlighting.
• Electronic on/off.
TECHNICAL DATA
Voltage
Power consumption
Motor voltage
Power supply
Speed of cutters
Shaving heads
Battery
SAP CODING: 8856 890 99999
CAUTION!
WHILE CHECKING THE P.C.-BOARD REMEMBER
THAT MOST COMPONENTS AND MOTOR ARE
ENERGIZED BY MAINS VOLTAGE.
100-240 V 50/60Hz
Motor depending
2.4 V
SMPS
> 2100 r.p.m.
HQ6 - 4822 690 10214
Green NiMH pack AA
:
:
:
:
:
:
:
PRODUCTS MEETS THE REQUIREMENTS REGARDING
INTERFERENCE SUPPRESION ON RADIO AND TELEVISION.
- AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD
FUNCTION PROPERLY AND HAS TO MEET THE SAFETY
REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED
AT THIS MOMENT.
