WAGO Edge Computer
System Expansion 41
752-9800
Manual
Version 1.0.0
10
System Expansion
10.1 mPCIe Card
To install a suitable mPCIe expansion card, e.g., 4G modem, open the housing
by loosening the two screws on the left side of the housing. Remove the side
panel and insert the expansion card into the open mPCIe slot. Use the included
screw for this.
10.2 2.5” SSD / HDD
A 2.5” SSD / HDD can be used to expand storage space.
Open the housing by loosening the six screws on the left side of the housing and
remove the side panel. Remove the free hard drive mount by loosening the four
screws. Secure the hard disk in the mount with the enclosed screws. Connect the
hard drive to the SATA interface on the motherboard. Secure the hard drive
mount with the four screws. Close the housing with the six screws.