WAGO-TO-PASS® 761
WAGO TO-PASS® Web 119
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
Manual
Version 1.0.0
The counter status shows the last change that has occurred since the last value
script transmission, or after a system start (independent of the SMS and logger
status).
The counter values are indicated as hexadecimal values (as are the MODBUS
values).
Alarms can have the following statuses:
Table 53: Alarm status
Status Explanation
0
No alarm
1
First value reached/transgressed
2
Second value reached/transgressed
If both values are reached simultaneously, only status "2" is transmitted.
&SQ: Signal quality or modem connection (without formatting):
Table 54: Signal quality (from AT Reference Guide by Telit)
Value
Quality
0
(-113) dBm or less
1
(-111) dBm
2 ... 30 (-109)dBm ... (-53)dBm / 2 dBm per stage
31
(-51)dBm or greater
99
Unknown or cannot be measured
&MV: Transmission is performed only up to the last configured register (module
address not 0).
If registers were not previously parameterized (module address = 0), these will be
marked as "ZERO".
If errors occurred during register querying, these will be flagged with "ERRO".
