WAGO-TO-PASS® 761
Diagnostics 107
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
Manual
Version 1.0.0
9.2
Testing the Counter Inputs
To test the counter inputs, select the menu item
Edit > Test counters
.
Figure 46: Testing counters
The counter statuses are shown at the top of the window, while the counter values,
the starting and end values and the limits are shown at the bottom.
To start a counter, click the button
[Activate]
.
To stop a counter, click the button
[Deactivate]
.
To restore the counter to its starting value, click the button
[Reset]
.
To set a counter to a new value, enter the required counter value in the
corresponding input field and then click the associated button
[Set]
to apply the
new value.
Click
[OK]
to end the test and close the window.
Alternatively, the counter inputs can also be tested using the menu item
Visualization > Process values
.