WAGO-I/O-SYSTEM 750
Diagnostics
53
753-647 DALI Multi-Master Module
Manual
Version 1.0.0
Pos: 75 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Diagnose - Service/Diagnose - Überschrift 1 @ 4\mod_1240831069471_21.doc @ 31372 @ 11 @ 1
8 Diagnostics
Pos: 76 /Serie 753 (WAGO-I/O-SYSTEM)/Gerätebeschreibung/Diagnose/Diagnose 753-0647 @ 12\mod_1332267983490_21.doc @ 91716 @ @ 1
Diagnosis of the DALI-Multi-Master module is performed via the evaluation of
the display elements (see Section "Display Elements").
You can also perform diagnostics for all DALI network subscribers located in the
connected DALI line using the WAGO-DALI Configurator configuration
software.
A list of devices is generated for this in the diagnostics dialog window with the
individual device status by clicking the
[Query status]
button.
Any errors are indicated in the corresponding table column by a red square with
an exclamation mark.
Figure 24: Diagnostics using the WAGO-DALI Configurator – Example
A selection list containing different functions, some of which can be executed to
eliminate device errors (such as a duplicate address) is also displayed (on the
right, below the device list).
