WAGO-I/O-SYSTEM 750
Assembly
41
753-647 DALI Multi-Master Module
Manual
Version 1.0.0
Pos: 65.15 /Serie 753 (WAGO-I/O-SYSTEM)/Montieren/Codierung der Stecker Serie 753 @ 4\mod_1240393983875_21.doc @ 31217 @ 3 @ 1
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the module with
the appropriate connector.
1.
Insert the pin into the socket.
Figure 12: Assembling the coding pins
2.
Position the assembled coding pins in the I/O module. Due to its design,
each pin allows four different coding options (i.e.; 16 different options using
two pins).
Figure 13: Inserting the coding pins
3.
Place the connector onto the I/O module.
Figure 14: Plugging the connector into place
