WAGO 751-9301 Скачать руководство пользователя

Страница: 98 / 198

98 Commissioning

WAGO I/O System Compact

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

Figure 20: WBM Status Bar (Example)

•

Date and Time - Local date and local time and on the device

•

Setting of the mode selector switch

•

LED status of the Device:

All LEDs are graphically represented and are labeled with their particular

designation (e.g., SYS, RUN, …). The following colors are possible:

- gray: LED is off.

- full color (green, red, yellow, orange): The LED is activated in the

particular color.

- half color:

The LED is flashing in the corresponding color. The other half of the

surface is then either gray or also colored. The latter case indicates that

the LED is flashing sequentially in different colors.

A tooltip containing more detailed information opens as long as the cursor

is positioned over an LED. The text that is displayed also contains the

message that put the LED into its current status. The time of the message

is also shown.

The states displayed in the WBM will not always correspond at the precise

time to those on the controller. Data has a runtime during transmission and

can only be queried at a certain interval. The time period between two

queries is 30 seconds.

Do not power cycle the controller after changing any parameters!

Some parameter changes require a controller restart for the changes to apply.

Saving changes takes time.

Do not power cycle the controller to perform a restart, i.e., changes may be lost

by shutting down the controller too soon.

Only restart the controller using the software reboot function. This ensures that

all memory operations are completed correctly and completely.

A description of the WBM pages and the respective parameters can be found in

the appendix in Section “Configuration Dialogs” > “Web-Based Management

(WBM)”.

Содержание 751-9301







































































































































































































Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды

WAGO 751-9301, Руководство пользователя

Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды