WAGO I/O System Compact
Appendix 167
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.2.20 “Configuration of Connection <n>” Page
You can find settings and information for cloud access on the “Configuration of
Connection <n>” page.
A page is displayed for each cloud access.
“Configuration” Group
The parameters indicated depend on the cloud platform setting and, if applicable,
on other settings in this group.
The dependencies are shown in a separate table.
Table 102: WBM “Configuration of Connection <n>” Page – “Configuration” Group
Parameter
Explanation
Enabled
You can enable/disable the cloud connectivity
function.
Cloud platform
Select the cloud platform.
Hostname
Enter the host name or IP address for the selected
cloud platform.
Port number
Enter the port here to which a connection is to be
established.
Typical values are 8883 for encrypted connections
and 1883 for unencrypted connections.
Device ID
Enter the device ID for the selected cloud platform.
Client ID
Enter the client ID for the selected cloud platform.
Authentication
Select the authentication method.
Possible settings are “Shared Key Access” or “X.509
Certificate”.
Activation Key
Enter the activation key for the selected cloud
platform.
Clean Session
Specify whether clean session should be enabled
during the connection to the cloud service. If clean
session is enabled, the information and messages
on this connection are not stored persistently on the
cloud service.
TLS
You can specify whether TLS encryption should be
used for the connection to the cloud platform.
Amazon Web Services (AWS) always uses TLS.
CA file
Enter the path here to the file encoded in PEM
format that contains the trusted CA certificate to use
to establish an encrypted connection. The default
value is the CA certificate /etc/ssl/certs/ca-
certificates.crt that is already installed on the
controller.
Users
Enter the user name for cloud service
authentication.
Password
Enter the password for cloud service authentication.
