WAGO 751-9301 Скачать руководство пользователя страница 151

Страница: 151 / 198

WAGO I/O System Compact

Appendix 151

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

15.1.1.2.8 “Firmware Backup” Page

You can find the controller data backup settings on the “Firmware Backup” page.

“Firmware Backup” Group

Table 81: WBM “Firmware Backup” Page – “Firmware Backup” Group

Parameter

Explanation

Boot Device

The storage medium from which the device was

booted is displayed here.

Destination

Select the storage location for the backup here.

Memory Card

The data is written to the memory

card.

This selection only appears if a

memory card is inserted and the

device has not been booted from

the memory card.

Network

The data is saved in the file system

and then made available as a

download on the PC.

PLC runtime project

If you want to save the PLC runtime project, select

this checkbox.

Settings

If you want to save the device settings, select this

checkbox.

System

If you want to back up the operating system of the

device, select this checkbox.

Encryption

If you want to save the data in encrypted form,

select this button.

Encryption passphrase

Enter the encryption password here.

This input field only appears if the “Encryption”

checkbox is selected.

Confirm passphrase

Enter the encryption password again here to check

it.

This input field only appears if the “Encryption”

checkbox is selected.

Note the firmware version!

Restoring the controller operating system (“System” selection) is only permissible

and possible if the firmware versions at the backup and restore times are

identical.

If necessary, skip restoring the controller operating system, or match the

firmware version of the controller to the firmware version of the backup time

beforehand.

Содержание 751-9301







































































































































































































Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды

WAGO 751-9301, Руководство пользователя

Результаты поиска

Содержание 751-9301

Отзывы:

Похожие инструкции для 751-9301

Бренды по названию

Популярные бренды