WAGO I/O System Compact
Commissioning 97
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
8.8.1.2 General Information about the Page
The IP address of the active device is displayed in the entry line of the browser
window.
The WBM pages are only displayed after logging in. To log in, enter your
username and password in the login window and click the
[Login]
button.
Figure 18: WBM Browser Window (Example)
The tabs for the various WBM areas and the
[Reboot]
and
[Logout]
buttons are
displayed in the header of the browser window. The
[Reboot]
button only
appears if you are logged in as an administrator.
If not all tabs can be displayed in the selected width of the window, a tab with
ellipsis (...) is displayed instead of the tabs that cannot be displayed. This allows
you to select the tabs (not shown) using a pull-down menu.
Figure 19: WBM Header with Tabs that Cannot be Displayed (Example)
The navigation tree is shown on the left of the browser window. The content of
the navigation tree depends on the selected tab.
You can use this navigation tree to go to the individual pages and, where
provided, subpages included in these pages.
The current device status is displayed in the status bar.
