40
Connect Devices
WAGO-I/O-SYSTEM 750 XTR
750-xxxx/0040-xxxx Design Notes /XTR
Manual
Version 1.2.0
Fieldbus coupler or controller
I
(5 V) total
= Sum of all the internal current consumption of the connected
bus m internal current consumption fieldbus
coupler/controller
Internal system supply module
I
(5 V) total
= Sum of all the internal current consumption of the connected
bus modules at internal system supply module
Input current I
(24 V)
=
5 V
* I
(5 V) total
24 V
η
Pos: 34.19 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/Systemversorgung - Ausl egung - n=0,87 (87% Netzteilwir kungsgrad bei 24 V) @ 3\mod_1232950112718_21.docx @ 26824 @ @ 1
η = 0.87
(87 % Efficiency of the power supply at nominal load 24 V)
Pos: 34.20 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/Systemversorgung - Ausl egung - Hinweis: Bei T est der Stromaufnahme Ausgänge akti vieren @ 3\mod_1232950110750_21.docx @ 26812 @ @ 1
Activate all outputs when testing the current consumption!
If the electrical consumption of a power supply point for the 24 V system
supply exceeds 500 mA, then the cause may be an improperly dimensioned
node or a defect.
During the test, you must activate all outputs.
Pos: 34.21 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
