38
Connect Devices
WAGO-I/O-SYSTEM 750 XTR
750-xxxx/0040-xxxx Design Notes /XTR
Manual
Version 1.2.0
Figure 15: System Supply for Fieldbus Coupler/Controller
Pos: 34.10 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/Systemversorgung - Anschl uss - Hi nweis: Gleichz. Rücksetzen all er Versorgungsmodule @ 3\mod_1232950097906_21.docx @ 26760 @ @ 1
Only reset the system simultaneously for all supply modules!
Reset the system by switching the system supply simultaneously at all supply
modules (fieldbus coupler/controller and potential supply module with bus power
supply) off and on again.
Pos: 34.11 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/Systemversorgung - Ausl egung @ 3\mod_1232950104812_21.docx @ 26780 @ 4 @ 1
6.5.2.2 Dimensioning
Recommendation
A stable power supply cannot always be assumed. Therefore, you should use
regulated power supplies to ensure the quality of the supply voltage.
The supply capacity of the fieldbus coupler/controller or the internal system
supply module can be taken from the technical data of the components.
Table 14: Alignment
Internal current
consumption
*)
Current consumption via system voltage (5 V for electronics
of I/O modules and fieldbus coupler/controller).
Total current
for I/O modules
*)
Available current for the I/O modules. Provided by the bus
power supply unit. See fieldbus coupler/controller and
internal system supply module
*)
See current catalog, manuals, Internet
Pos: 34.12 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
