WAGO 750-626/040-000 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 56

background image

WAGO-I/O-SYSTEM 750 XTR

Connect Devices

41

750-xxxx/0040-xxxx Design Notes /XTR

Manual

Version 1.2.0

Pos: 34.22 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung - Überschrift 3 @ 3\mod_1232950080953_21.docx @ 26688 @ 3 @ 1

6.5.3

Field Supply

Pos: 34.23 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung - Anschluss @ 3\mod_1232950082031_21.docx @ 26696 @ 4 @ 1

6.5.3.1 Connection

Sensors and actuators can be directly connected to the relevant channel of the I/O

module in 1, 2, 3 or 4 conductor connection technology. The I/O module supplies

power to the sensors and actuators. The input and output drivers of some I/O

modules require the field side supply voltage.

Pos: 34.24 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung - Anschluss - Ei nspeisung feldseitig (St erweiterter EC O) @ 3\mod_1232950087703_21.docx @ 26712 @ @ 1

The fieldbus coupler/controller provides field side power (DC 24 V). In this case

it is a passive power supply without protection equipment.

Pos: 34.25 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung - Anschluss - Potentialgruppen mit Ei nspeiseklemme XTR @ 17\mod_1382697121058_21.docx @ 135120 @ @ 1

Power supply modules with or without diagnostic capability are available for the

power supply of other field potentials (e.g. 24 VDC, 0 VAC/DC … 230 VAC/DC,

120 VAC, 230 VAC). The power supply modules can also be used to set up

various potential groups. The connections are connected in pairs to a power

contact.

Pos: 34.26 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung XTR - Anschluss - Bil d: Fel dversorgung (Standar d + erweiterter EC O) @ 16\mod_1373895183197_21.docx @ 126188 @ @ 1

Figure 16: Field Supply for Fieldbus Couplers/Controllers (Example)

Table 15: Legend for Figure “Field Supply for Fieldbus Couplers/Controllers”

Position Description

1

Field supply 24 VDC

2

Field supply 0 V

3

Power jumper contacts (potential distribution to adjacent I/O modules)

Pos: 34.27 /Serie 750 ( WAGO-I/O-SYST EM)/Systembeschrei bung/Versorgung/F eldversorgung - Anschluss -Weiterleitung Versorgungsspg., Strombelastung 10 A, neue Ei nspeiseklemme @ 8\mod_1279805441785_21.docx @ 60845 @ @ 1

The field-side power supply is automatically derived from the power jumper

contacts when snapping an I/O module.

The current load of the power contacts must not exceed 10 A on a continual basis.

«
...
39
40
41
42
43
...
»

Содержание 750-626/040-000

























































Отзывы:

Нет отзывов

Похожие инструкции для 750-626/040-000

Бренд: GE Страницы: 28

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 34

Бренд: Panasonic Страницы: 8

Бренд: dbx Страницы: 52

Бренд: Teac Страницы: 24

Бренд: TeachLogic Страницы: 21

Бренд: TagMaster Страницы: 28

Бренд: Zmotion Страницы: 48

Markoprint iJET

Бренд: Weber Страницы: 127

Бренд: Zepro Страницы: 64

Бренд: Bame Страницы: 12

iNELS Air AirIM-100S

Бренд: Elko Страницы: 8

Бренд: Vansco Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды