WAGO-I/O-SYSTEM 750
Commissioning
85
750-451 8 AI RTD
Manual
Version 1.1.0
7.2.1.3.4 “Open Parameter File” Menu Item
In this menu item, you can open and load an existing parameter file. Please
proceed as follows:
1. Click the
[Open parameter file]
button in the main menu.
2. A standard Windows dialog appears to select the source directory.
3. Select the parameter file you want to open.
4. Click
[Open]
in the standard Windows dialog.
5. The parameter file is opened.
7.2.1.3.5 “Save Parameter File” Menu Item
Important note!
Please note that the calibration settings are not saved in the parameter file.
In this menu item, you can save the changes you selected and made to a parameter
file. Please proceed as follows:
1. Click the
[Save parameter file]
button in the main menu.
2. A standard Windows dialog appears to select the target directory.
3. Select the target directory to which the new parameter file should be saved.
4. Click
[Save]
in the standard Windows dialog.
5. The parameter file is saved to the target directory you selected.
