WAGO 2789-9080, Руководство по эксплуатации продукта

Страница: 27 / 40

2789-9080 Fieldbus Description
| Version: 1.1.0 27
Communication Module IO-Link
Disable reset to factory settings
Bit 7 locks or unlocks the reset to factory settings.
Table 46: Disable reset to factory settings
Bit 7 IODD Value Description
1 active enabled
0 inactive disabled
4.3 Messages and Events
4.3.1 Error Messages for WAGO Power Supplies Pro 2
Table 47: Error Messages
Index
(Hex.) Error Message Description
0x8000 Device application error – no details Unsupported function
0x8011 Index not available Parameters not available on this index.
0x8012 Subindex not available Subindex not available
0x8023 Access denied – Index not writeable Write access to RO
1)
parameter
0x8030 Parameter value out of range Limiting value overrun
0x8033 Parameter length overrun Invalid parameter length, structure error, CRC
2)
error
0x8035 Function not available Writing an invalid value to command parameter.
0x8036 Function temporarily unavailable Command not possible due to current command
status (e.g., during block parameterization that is
not closed; other commands are rejected).
0x8040 Invalid parameter set Written parameter value does not match the cur-
rent configuration.
0x8041 Inconsistent parameter set Plausibility check of the block parameterization
failed.
0x8158 Password protection active No parameter access; password protection en-
abled
1)
Read Only
2)
Cyclic redundancy check
4.3.2 Events and Measured Values for WAGO Power Supply Pro 2
Table 48: Events – Warnings
Index Bit
No.
Events – Warning Description
1539 0 Output under-voltage Undervoltage at output below DC OK threshold
1 outOverVoltage Overvoltage: +10 % of the set output voltage
2 OutputOverLoad Overload present
3 outOverLoadCustom Configurable overload threshold has been exceeded.
4 opHoursLimitReached Configurable operating hours have been reached.
5 powerBoostActive PowerBoost output, information is visible for 5 seconds.
6 topBoostActive TopBoost output, information is visible for 5 seconds.
7 highTemperature High device temperature
8 diEvent Event on DI is present.