WAGNER Jaguar 75-150 Скачать руководство пользователя страница 6

Страница: 6 / 84

VERSION 02/2018

ORDER NUMBER DOC 2340282

IceBreaker 150-300 cm

ABOUT THESE INSTRUCTIONS

1.1

PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device. The operating manual is part of the device and must be available

to the operating and service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual. Operating and service personnel should be instructed according to the

safety instructions. This equipment can be dangerous if it is not operated according to the

instructions in this operating manual.

1.2

WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this manual highlight particular dangers to users and to the

device and state measures for avoiding the hazard. These warning instructions fall into the

following categories:

DANGER

Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING

Potential risk.

Non-observance can result in death or serious injury.

CAUTION

Potentially hazardous situation.

Non-observance may result in minor injury.

NOTICE

Potentially hazardous situation.

Non-observance may result in damage to property.

Notice

Provides information about particular characteristics and how to

proceed.

Explanation of warning notice:

LEVEL OF DANGER

This notice warns you of a hazard!

Possible consequences of not observing the warning notice.

The measures for preventing the hazard and its consequences.

1.3

LANGUAGES

The operating manual is available in the following languages:

Original operating manual

Language

Order no.

German

2340281

Translation of the original operating manual

Language

Order no.

Language

Order no.

English

2340282

Russian

2351798

French

2340285

Turkish

2386997

Italian

2340284

Japanese

2359824

Spanish

2340286

Dutch

2367470

Finnish

2391504

Swedish

2391503

Additional languages on request or at:

www.wagner-group.com

Содержание Jaguar 75-150





















































































Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar 75-150, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды