WAGNER Jaguar 75-150 Скачать руководство пользователя страница 31

Страница: 31 / 84

VERSION 02/2018

ORDER NUMBER DOC 2340282

IceBreaker 150-300 cm

ASSEMBLY AND COMMISSIONING

6.1

TRAINING OF ASSEMBLY/COMMISSIONING PERSONNEL

The assembly and commissioning personnel must have the technical skills to safely

commission the device.
When assembling, commissioning and carrying out all work, read and follow the

operating manuals and safety regulations for the additionally required system

components.

A skilled person must check to ensure that the device is in a reliable state after it is installed

and commissioned.

6.2

STORAGE CONDITIONS

Until the point of assembly, the device must be stored in a dry location, free from vibrations

and with a minimum of dust. The device must be stored in closed rooms.
The air temperature at the storage location must be between -20 °C and 60 °C (-4 °F and

140 °F).
The relative air humidity at the storage location must be between 10 and 95% (without

condensation).

6.3

INSTALLATION CONDITIONS

The air temperature at the installation site must be in a range between 5 °C and 50 °C (41

°F and 122 °F).
The relative air humidity at the installation site must be between 10 and 95% (without

condensation).

6.4

TRANSPORTATION

The pump must be moved on a trolley (heavy-duty PC trolley)

or with lifting equipment or a crane.

Only the pump, without trolleys, may be lifted by the lifting

eye nut or lifting eye bolt (see accessories) and transported

short distances.

B_04065

Содержание Jaguar 75-150





















































































Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar 75-150, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды