WAGNER Jaguar 75-150 Скачать руководство пользователя страница 35

Страница: 35 / 84

VERSION 02/2018

ORDER NUMBER DOC 2340282

IceBreaker 150-300 cm

6.7

COMMISSIONING

WARNING

Gas mixtures can explode if there is an incompletely ﬁlled pump!

Danger to life from flying parts.

Ensure that the pump and suction system are always completely ﬁlled with flushing

agent or working medium.
Do not spray the device empty after cleaning.

NOTICE

Impurities in the spraying system!

Spray gun blockage.

Flush the spray gun and paint supply with a suitable flushing agent before

commissioning.

Emergency stop, see Chapter

7.2

Preparation

Before every start-up, the following points should be observed as laid down in the operating manual:

− Secure spray gun with safety lever.
− Check the permissible pressures.
− Check all connections for leaks.
− Check hoses for damage in accordance with Chapter

8.2.3

− Fill the separating agent in accordance with Chapter

8.2.3.1

Fill the pump with flushing agent

The devices are tested during manufacturing with emulsifying oil, pure oil or solvent.

Possible residues must be flushed out of the circuits with a solvent (flushing agent) before

commissioning.

− Fill the empty device with flushing agent in accordance with Chapter

8.2.5

Pressure tightness test

WARNING

Overpressure!

Risk of injury from bursting components.

The operating pressure must not exceed the value shown on the type plate.

− Gradually increase the pressure in pump with the pressure regulator until maximum

pressure is reached. Maintain the pressure for 3 minutes and check all connection

points for leaks.

− Depressurization in accordance with Chapter

7.4

Verifying a Safe Operational Condition

A skilled person must check to ensure that the device is in a reliable state after it is

installed and commissioned.

This includes:

− Carry out safety checks in accordance with Chapter

8.2.3

Filling with Working Material

− According to Chapter

8.2.5

Содержание Jaguar 75-150





















































































Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar 75-150, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar 75-150

Отзывы:

Бренды по названию

Популярные бренды