11
VERSION 02/2018
ORDER NUMBER DOC 2340282
IceBreaker 150-300 cm
3
Medium supporting atomizing
To atomize the product, use only weakly oxidizing gases, e.g., air.
Surface spraying, electrostatics
Do not spray device parts using electrostatic equipment.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames
or sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
Use only a damp cloth to clean the device.
Air in the pump fluid
Ignitable gas mixtures can form if air enters the pump fluid.
Prevent the pump from taking in air and running dry.
If air has been taken in, fix the leak. Then, fill slowly and in a controlled manner until
the air has escaped.
Air in the pumped fluid can be caused by damaged packings.
Avoid operating the pump with damaged packing.
Ensure that the separating agent tank is filled with sufficient separating agent.
Periodically check that the pump is working smoothly, paying special attention to
the presence of air in the pumped fluid.
Filling and emptying
Ignitable gas mixtures can form in the fluid section or product hoses if the pump must
be emptied for maintenance and/or repair purposes.
Empty and fill the device slowly and in a controlled manner.
Avoid potentially explosive atmosphere in the surroundings.
3.3
TYPE PLATES
Designation
1 Manufacturer and CE Identification
2 Pump type
3 Maximum product pressure
4 Pump ratio
5 Flow rate per double stroke
6 Maximum air inlet pressure
7 Maximum product temperature
8 Model year - serial number
9 Read the operating manual before use
1
2
4
5
6
7
8
9
3
B_06856
Pumpentyp / Pump type
Max. Materialdruck / Fluid pressure
Übersetzungsverhältnis / Ratio
Fördermenge DH / Delivery DS
Max. Luftdruck / Air pressure
Max. Temp. Material / Fluid
Baujahr - Serie Nr. / Year of manufacture - Serial No.
Vor Gebrauch Betriebsanleitung beachten / Check manual before use!
Wagner International AG
MADE IN SWITZERLAND
CH-9450 ALTSTÄTTEN
II 2 G Ex h IIB T3/T4 Gb X
