WAGNER AquaCoat 5010, Перевод оригинального руководства по эксплуатации

Страница: 23 / 160

23
B_05913
32
30
34 35
33
31 34
36
OPERATING MANUAL
EDITION 02/2016 ORDER NUMBER DOC 2366600
AquaCoat cabinet
RH side wall (from the inside)
Pos Designation
30 Grounding switch
31 Grounding cylinder
32 Leakage resistance 3 GOhm
33 Potential equalization connection of the
stripped part of the product hose (for Cobra)
34 Passageway for product hose
35 Connection for grounding cable for grounding
the conductive sheath of the product hose.
36 Grounding point
The AquaCoat spray system is designed for processing non-combustible liquids (water-
based lacquers) in accordance with the AirCoat method.
The spray product is regulated via the trigger guard on the gun (4) and the VM 5020W (3)
control unit. It is drawn in in the sealed off inner chamber of the AquaCoat cabinet (1) with
a product pressure generator (11) via a suction system (13), electrostatically charged and
sprayed in the nozzle of the spray gun using the AirCoat process.
The product pressure generator and spray gun are connected by the shielded, high-pressure
product hose.
5.2
MODE OF OPERATION