Gebrauchsanweisung Untersuchungseinheit cubeONE,
directions for use, refraction unit cubeONE
19
Wagner & Guder Medical GmbH
issue September 2020
Operation
Control panel
The operating switch with the control lamp is located at the instrument table, see page 14
(position 15). The examination unit is ready for operation as soon as the button is pressed and
the lamp lights up green. This also applies to already installed examination units or additional
components, if they are supplied with voltage via the switchable socket strip 230VAC/4A. The
examination devices on the telescopic table are automatically ready for operation when table
position 1 or table position 2 is reached. Next to the operating button there are further control
functions.
1
Patient chair DOWN
2
Patient chair UP
if you put both buttons
, patient chair will move „Automatic down“ to lowest position
this function is working by a time delay of 10sec. After finish this time patient chair is able to
move UP again
3
Button reading lamp ON/ OFF
4
Button roomlight control
5
Blind control Down
6
Blind control UP
7
AUX, free button
8
operation button with LED light (green), Stand- By- Mode
1
2
3
5
4
6
8
1
7
