Gebrauchsanweisung Untersuchungseinheit cubeONE,
directions for use, refraction unit cubeONE
9
Wagner & Guder Medical GmbH
issue September 2020
Requirements for operation
Before the first operation
Check the stability of the examination unit
Check the fixing points of the installed equipment
Pay attention to the maximum permissible weights of the devices
All cables and plug connections are in perfect condition
The mains plug is plugged into a socket with a working protective
conductor.
Check safety-relevant circuits
Before the operation
Check the fixing points of the installed devices
Clean the permissible surfaces of the examination unit and contact
surfaces of the installed devices.
Advise patients/customers of possible risks
During the operation
Never leave patients/ customers unattended at the devices
Do not leave an instrument unattended with the light source switched
on.
The lifting element of the patient chair has a maximum load capacity of
135kg and is not designed for continuous operation.
After the operation
Switch OFF the examination unit or installed devices if they are not in
use
Insufficient hygiene or incorrect cleaning contrary to the instructions for
use can contribute to the risk of infection for the patient/customer and
damage surfaces of the examination unit or lead to discoloration
Liability and warranty
Warranty and liability are based on the conditions specified in the contract
NOTCIE Loss of warranty
The manufacturer is not liable for damage caused by unauthorised
intervention in the device or improper handling. In addition, all warranty
claims are void.
