Waeco AirCon Service 6300G, Руководство по эксплуатации

Страница: 31 / 254

English
4. To check the zero point of the scales for oil and UV additive, open the cover (13) on the left side and take
the containers off the catches:
• Container for fresh oil (10)
• Container for UV additive (11)
• Drained oil receptacle (12)
5. When the scales are relieved, press ENTER to confirm. The prompt to remove the containers from the scale
will flash. Once you have set the zero point, the selection menu for the scales appears again.
6. Return the containers to the operating positions: Reattach the containers for oil (10) and (12) and for the UV
additive (11) to the snap locks and close the cover (13).
7. Press STOP twice to access the standby menu.
14.4 Changing the dryer filter
1. In the basic menu use the cursor keys or to select
Free selection
.
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Skip the query requesting
CAR DATA
.
4. Select
Rec/Recycling phase
.
5. Set the
Pressure increase Test time
to
1
.
6. Press ENTER to confirm.
7. Deselect
Vacuum phase
using
No
.
8. Press ENTER to confirm.
9. Deselect
Filling phase
using
No
.
10. Press ENTER to confirm.
29