Waeco AirCon Service 6300G, Руководство по эксплуатации

Страница: 29 / 254

14 Service tasks
23. If necessary, use the keypad to enter the data and press
ENTER
to confirm. If no data has to be entered,
press ENTER to switch to the next program step.
24. Deselect
Rec/Recycling phase
using
No
(the setting flashes) and press ENTER to confirm.
25. Select
Vacuum phase
(the setting flashes) and press ENTER to confirm.
26. If necessary, use the keypad to enter the data and press ENTER to confirm. If no data has to be entered,
press ENTER to switch to the next program step.
27. Select
Filling phase
(the setting flashes) and press ENTER to confirm.
28. Enter the refrigerant filling quantity (note the oil filling quantity of the compressor).
29. Then follow the instructions on the display: Select the setting (which then flashes) and press
ENTER to con-
firm.
30. Select
Process start
by pressing ENTER .
After the filling is complete, you will be prompted to disconnect the hoses of the A/C service unit from the ve-
hicle air conditioning system.
31. Disconnect the service hoses and press ENTER to confirm.
The service hoses will now be drained. the A/C service unit is then ready for further use.
32. Put the valve caps of the vehicle air conditioning system back on the connections.
14 Service tasks
14.1 Leak test
Check the A/C service semiannual for leaks in accordance with the applicable legal requirements. Use an elec-
tronic leak detector for this purpose.
14.2 Resetting the counters
After you have finished one or more service tasks, you must reset the respective counters. To do this proceed as
follows:
1. Enter the
Other selections
–
Service
menu.
2. Enter the code
7782
.
3. Use the cursor keys or to select the required entry and press
ENTER to confirm.
4. Follow the display instructions, and press and hold the ENTER button for 3 s.
5. Switch back to the previous selection using STOP .
The following counters can be reset:
R1234 from system
07/03/17
g. 4155
STOP-EXIT
R1234yf from system
indicates how many grams of refrigerant have been extracted from air conditioning
systems using the menu item
Short selection
or
Free selection
since the last reset (see date).
R1234 from tank
07/03/17
g. 3395
STOP-EXIT
R1234yf from tank
indicates how many grams of refrigerant were added to the A/C service unit using the
menu item
Int. vessel filling
since the last reset (see date).
R1234 to system
07/03/17
g. 1200
STOP-EXIT
27