EN
Initial start-up
AirCon Service Center
94
5. Enter the password
“3282”
.
6. The company data is shown in the third line of the display (
6
).
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the
message
“Enter company data”
(
“01”
to
“05”
).
Use the cursor keys
or
to select the line of company data you
want.
7. Use the keypad (
7
) and the cursor keys to enter the data.
To switch between upper and lower case, press the Info key
.
To delete a character, briefly press the
C
key.
To delete the current line, press and hold down the
C
key.
8. Press
ENTER
to confirm.
9. Press
STOP
. The set data is activated.
10. Press
STOP
again to access the standby menu.
7.5
Entering the date and time
The date and the time are printed along with the company data on every
service log.
1. In the basic menu, use the cursor keys
or
to select
“Other
selections”
:
2. Press
ENTER
to confirm.
3. Use the cursor key
to select
“Service”
.
4. Press
ENTER
to confirm.
5. Enter the password
“8463”
.
6. Use the keypad and the cursor keys to enter the information.
7. Press
ENTER
to confirm.
8. Press
STOP
to access the standby menu.
Short selection
Free selection
Other selections
ENTER-OK
ASC1300G-ASC2300G-ASC3300G_OPM_DE-EN-ES-FR-RU.book Seite 94 Dienstag, 30. Juni 2020 2:12 14
