EN
Operation
AirCon Service Center
106
8.5
Transferring the consumption of refrigerant onto a
USB stick
Each time a suction or filling process (single process or fully automatic) is
completed, the station stores all the data in the internal memory. A report
can be generated using this data and transferred to a USB stick.
I
Each report is saved in two formats:
as an HTML file (to be opened with any internet browser)
as an XLS file (to be opened with Microsoft Excel)
I
8.5.1
Reports after the year has changed
After the year has changed, the station indicates that the data stored from
the previous year should be transferred to a USB stick. When you transfer
the annual data onto a USB stick, it is then deleted from the station's inter-
nal memory.
1. Insert the USB stick in the USB port (
15
).
2. The instructions appear on the display.
8.5.2
Manual reports
You can transfer a monthly or annual report onto a USB stick manually
anytime.
1. Insert the USB stick in the USB port (
16
).
2. In the basic menu, use the cursor keys
or
to select
“Other
selections”
:
3. Press
ENTER
to confirm.
NOTE
The USB stick must be formatted with the FAT32 file system.
NOTE
The report may contain a logo (e.g. the workshop logo) if a graphic is
copied to the USB flash drive that meets the following requirements.
File format: JPEG format
File name: logo.jpg (note upper and lower case)
Screen size: 370 x 50 pixels
The company address in the report is taken from the station (see chap-
ter “Entering company data” on page 93).
Short selection
Free selection
Other selections
ENTER-OK
ASC1300G-ASC2300G-ASC3300G_OPM_DE-EN-ES-FR-RU.book Seite 106 Dienstag, 30. Juni 2020 2:12 14
