Wacom DTZ-2100D - 2005, Руководство пользователя

Страница: 21 / 99

19
Mounting the Cintiq21UX on the Stand
The product may be positioned vertically and secured to the stand so that it is at a
convenient angle (see page 18) after full stop. Set the product on the stand so that it is in
a vertical position. Fasten it to the stand with the stand-securing screws (see page 9) so
that it does not rotate
Using the Tablet in a Face-Up Position
The tablet may be removed from the stand, and used face up on a desktop or other
suitable surface. For this type of use, the cable position needs to be adjusted so that
it sticks out of the top of the
tablet.
1 Turn the tablet over so that it
is face down.
To avoid scratching or otherwise
damaging the display, first lay a
cushion or other soft material out,
and then place the unit face down
on top.
2 Remove the screws holding
the shaft bearing in place.
cushion
2
3
large cover
Cin21UX_EN .indd 19 09.7.29 9:50:43 AM