9
9
Interactive pen display
REAR VIEW
Important: Do not lift the unit by the stand; this may damage the stand mechanism. When lifting or moving
the pen display, always do so by grasping the main body casing.
Always store the interactive pen display on a stable surface or in its original packing carton when not
in use. Be sure to adjust the stand to the low tilt position before packaging. If you do not close the
stand, the notched mechanism may be damaged during transportation and storage.
Security slot
Allows easy attachment
of a security cable.
Pen storage compartment
Store by inserting one end of the pen into either side of the
compartment. Then gently press other end of pen into the
compartment.
Remove by pressing in on either end of the pen to eject opposite
end from the compartment. Grasp pen and remove.
Stand adjustment lever
Connection panel
•
Power connector
•
DVI/VGA (digital/analog) switch. Be sure to
set for the video connection you will be
using. Applies to the input and output
video connections.
•
DVI-I out connector
•
DVI-I in connector
•
USB connector
Display stand
Adjusts the tilt angle of the unit. See
Pen tether attachment point
If using a pen tether, connect it to an
attachment point located on either side of unit.
