Wacker Neuson Telehandler TH412 Скачать руководство пользователя страница 75

Страница: 75 / 362

Putting into operation 4

BA TH412 * 06/2017 * 4512_4-1_Steuerstand_en.fm

4-1

Putting into operation

4.1

Cabin/control stand

Notes about the cabin (option)

WARNING

Accident hazard due to restricted field of vision

Installing an optional protective screen can restrict the
field of vision.

►

Remove protective screens before performing
machine travel on public roads.

►

Slowly and carefully operate the machine during work
operation.

•

Keep the climbing aids (handholds and footholds) free
from dirt, snow and ice.

•

Keep windows (front, side and rear windows) free from
dirt, snow and ice.

•

Have a damaged cabin (for example one deformed in
an accident) replaced by an authorized service center.

•

Drilling, grinding, welding or removing parts from the
cabin is prohibited since this negatively affects the
protective effect of the cabin.

•

An additional protective screen (option) restricts
visibility.

Putting into operation

Содержание Telehandler TH412











































































































































































































































































































































































Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды

Wacker Neuson Telehandler TH412, Руководство оператора

Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды