Wacker Neuson Telehandler TH412, Руководство оператора

Страница: 123 / 362

Putting into operation 4
BA TH412 * 06/2017 * 4512_4-5_Motor_starten_en.fm
4-49
Starting the engine
Information
The forward-reverse control has to be in the neutral
position before the machine can be put into operation.
Start the engine as follows:
1. Sit down on the operator seat
2. Insert the starting key.
➥
Position 0 – no operating voltage
3. Turn the starting key to position I.
➥
The indicator lights illuminate.
- Preheating is automatically enabled by turning the
key to position I. The preheating indicator light 19
illuminates.
4. Turn the starting key to position III as soon as indicator
light 19 goes out.
- Turn against the spring pressure.
➥
Position III – the engine starts.
5. Release the starting key as soon as the engine starts.
- The starting key returns to position I.
6. The indicator lights go out.
0
Fig. 40
I
II
III