Wacker Neuson Telehandler TH412 Скачать руководство пользователя страница 226

Страница: 226 / 362

5-100

BA TH412 * 06/2017 * 4512_5-13_4_Opt_Anhaenger_en.fm

5 Operation

Trailer couplings

Safety instructions for trailer operation

Note the safety instructions

on page 2-12 "Trailer

operation"

•

Trailer operation is only allowed with a type-approved
and certified trailer coupling.

•

Trailer operation with the towing gear of the machine is
prohibited.

•

Observe the national regulations for trailer operation.

•

The specific national driving license is required.

•

Carrying passengers on trailers is prohibited.

•

Observe the maximum permissible vertical and trailer
load.

•

Do not exceed the permissible trailer speed.

•

Before coupling and uncoupling a trailer, secure it with
the parking brake and suitable wheel chocks to
prevent it from rolling away.

•

There must be nobody between the vehicle and the
trailer when hitching a trailer.

•

Hitch the trailer onto the vehicle correctly.

•

Check whether the brakes and lights work correctly.

•

Before starting vehicle travel, ensure that nobody is
between the vehicle and the trailer.

•

Trailer operation changes the machine’s operating
behavior, the operator must be familiar with this and
act accordingly.

•

Bear in mind the machine’s steering mode and the
trailer’s turning circle.

•

Before downhill machine travel, reduce travel speed or
adapt it to the circumstances.

Operation

Содержание Telehandler TH412











































































































































































































































































































































































Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды

Wacker Neuson Telehandler TH412, Руководство оператора

Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды