Wacker Neuson Telehandler TH412 Скачать руководство пользователя страница 127

Страница: 127 / 362

Operation 5

BA TH412 * 06/2017 * 4512_5-2_Gasbetaetigung_en.fm

5-1

Operation

5.1

Steering system

Steering modes

The steering is designed as a kingpin steering system on
the front and rear axles. It is hydraulically operated via
double-acting cylinders.

Synchronizing the steering system

CAUTION

Accident hazard due to asynchronous steering
movements.

If the machine is in operation for long periods, the
synchronization of the axles can shift out of position
respective to each other.

►

Stop machine operation immediately.

►

Synchronize the steering system.

Synchronize the steering system as follows:

1. Stop the vehicle.
2. Turn the steering wheel as far as it will go to the left or

right and then continue to turn the steering wheel for
several seconds.

3. Turn the steering wheel as far as it will go in the

opposite direction and then continue to turn the
steering wheel for several seconds.

4. Check carefully whether the steering is now

synchronized again.

If necessary, repeat points 1 – 4 until synchronization is
restored.

➥

The axles are now synchronized again.

Operation

Содержание Telehandler TH412











































































































































































































































































































































































Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды

Wacker Neuson Telehandler TH412, Руководство оператора

Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды