Wacker Neuson Telehandler TH412 Скачать руководство пользователя страница 132

Страница: 132 / 362

5-6

BA TH412 * 06/2017 * 4512_5-4_Fahren_en.fm

5 Operation

5.4

Machine travel operation

Machine travel

WARNING

Crushing hazard due to tipping over of machine!

A tipping vehicle can cause serious injury or death.

►

Keep the loader unit lowered during machine travel.

►

Adapt the travel speed to the prevailing conditions.

►

Adapt the driving speed to the material loaded.

►

Pay attention to persons and obstacles.

►

Pay attention to the machine’s tilting limit.

►

Reduce travel speed before performing downhill
machine travel.

►

Always fasten your seat belt.

►

Ensure that no parts of the body protrude outside the
vehicle.

►

Carefully steer the machine if the loader unit is raised.

►

Do not exceed the permissible payloads.

CAUTION

Caution during machine travel on snow and ice!

Snow and/or ice on roads and traffic areas can cause
accidents and injury.

►

Adapt your travel speed to the road conditions.

NOTICE

Damage to machine due to malfunctions.

►

Stop machine operation immediately if a malfunction of
the traveling drive, steering system and/or brakes is
detected.

►

Put the machine back into operation only after
correcting the malfunction.

Operation

Содержание Telehandler TH412











































































































































































































































































































































































Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды

Wacker Neuson Telehandler TH412, Руководство оператора

Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды