Wacker Neuson Telehandler TH412 Скачать руководство пользователя страница 283

Страница: 283 / 362

Maintenance 7

BA TH412 * 06/2017 * 4512_7-7_Kraftstoffsystem_en.fm

7-29

Refueling with diesel fuel

CAUTION

Health hazard due to diesel fuel!

Diesel fuel and fuel vapors are harmful to health!

►

Avoid contact with the skin, eyes and mouth.

►

Seek medical attention immediately in case of
accidents with diesel fuel.

►

Wear protective equipment.

CAUTION

Fire hazard due to diesel fuel!

Diesel fuel gives off flammable vapors.

►

Do not smoke, avoid fire and open flames.

►

Adding gasoline is prohibited.

Environment

Diesel fuel is harmful to the environment

►

Avoid releasing it into the environment.

►

Immediately absorb diesel fuel leaks, spills or
overflowing diesel fuel with a binding agent.

►

Dispose of fuel or binding agent in an environmentally
friendly manner and separately from other waste.

►

If larger amounts of diesel fuel are released, inform the
competent organizations (for example, environment
agency, fire department).

Содержание Telehandler TH412











































































































































































































































































































































































Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды

Wacker Neuson Telehandler TH412, Руководство оператора

Результаты поиска

Содержание Telehandler TH412

Отзывы:

Похожие инструкции для Telehandler TH412

Бренды по названию

Популярные бренды