manualshive.com logo in svg

Wacker Neuson RD 16, Руководство оператора, Страница: 78 / 244

Поделиться
Скачать
Wacker Neuson RD 16 Скачать руководство пользователя страница 78

Maintenance

RD 16

78                                       

wc_tx001076gb.fm

4.14 Hydraulic Oil Requirements

Wacker Neuson recommends the use of a good petroleum-based,
anti-wear hydraulic oil in the hydraulic system of this equipment. Good
anti-wear hydraulic oils contain special additives to reduce oxidation,
prevent foaming, and provide for good water separation.

When selecting hydraulic oil for your machine, be sure to specify anti-
wear properties. Most hydraulic oil suppliers will provide assistance in
finding the correct hydraulic oil for your machine.

Avoid mixing different brands and grades of hydraulic oils.

Most hydraulic oils are available in different viscosities.

The SAE number for an oil is used strictly to identify viscosity—it 

does

not

 indicate the type of oil (engine, hydraulic, gear, etc.).

When selecting a hydraulic oil be sure it matches the specified SAE
viscosity rating and is intended to be used as a hydraulic oil. See
section 

Technical Data—Lubrication.

Содержание RD 16





















































































































































































































































Отзывы:

Нет отзывов