manualshive.com logo in svg

Wacker Neuson RD 16, Руководство оператора, Страница: 3 / 244

Поделиться
Скачать
Wacker Neuson RD 16 Скачать руководство пользователя страница 3

RD 16

Foreword

wc_tx001346gb.fm

3

Foreword

Machines covered in this manual

Machine 
documentation

„

Keep a copy of the Operator’s Manual with the machine at all times. 

„

Use the separate Parts Book supplied with the machine to order replacement 
parts. 

„

Refer to the separate Repair Manual for detailed instructions on servicing and 
repairing the machine.

„

If you are missing any of these documents, please contact Wacker Neuson 
Corporation to order a replacement or visit www.wackerneuson.com. 

„

When ordering parts or requesting service information, be prepared to provide 
the machine model number, item number, revision number, and serial number.

Expectations 
for 
information in 
this manual

„

This manual provides information and procedures to safely operate and main-
tain the above Wacker Neuson model(s). For your own safety and to reduce 
the risk of injury, carefully read, understand, and observe all instructions 
described in this manual. 

„

Wacker Neuson Corporation expressly reserves the right to make technical 
modifications, even without notice, which improve the performance or safety 
standards of its machines.

„

The information contained in this manual is based on machines manufactured 
up until the time of publication. Wacker Neuson Corporation reserves the right 
to change any portion of this information without notice.

CALIFORNIA 
Proposition 
65 Warning

Engine exhaust, some of its constituents, and certain vehicle components, contain 
or emit chemicals known to the State of California to cause cancer and birth 
defects or other reproductive harm.

Laws 
pertaining to 
spark 
arresters

NOTICE:  

State Health Safety Codes and Public Resources Codes specify that in 

certain locations spark arresters be used on internal combustion engines that use 
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental dis-
charge of sparks or flames from the engine exhaust. Spark arresters are qualified 
and rated by the United States Forest Service for this purpose. In order to comply 
with local laws regarding spark arresters, consult the engine distributor or the local 
Health and Safety Administrator.

Machine

Item Number

RD 16

0620060
0620402
0620798
0620799

RD 16 IRH

0620127

Содержание RD 16





















































































































































































































































Отзывы:

Нет отзывов