Wacker Neuson RD 16, Руководство оператора, Страница: 16 / 244

Safety Information RD 16
16
wc_si000399gb.fm
1.5.4 All adjustments and repairs MUST be completed before operation. Do
not operate the machine with a known problem or deficiency! All
repairs and adjustments should be completed by a qualified
technician.
1.5.5 Do not attempt to clean or service the machine while it is running.
Rotating parts can cause severe injury.
1.5.6 Do not use gasoline or other types of fuels or flammable solvents to
clean parts, especially in enclosed areas. Fumes from fuels and
solvents can become explosive.
1.5.7 Do not modify the machine without the express written approval of the
manufacturer.
1.5.8 Do not remove the radiator cap when the engine is running or hot. The
radiator fluid is hot and under pressure and may cause severe burns!
1.5.9 DO NOT stand under the machine while it is being hoisted or moved.
1.5.10 DO NOT get onto the machine while it is being hoisted or moved.
1.5.11 DO NOT modify, weld, or drill safety frames (ROPS) fitted as original
equipment. DO NOT loosen or remove bolts. DO NOT weld, drill or
modify a broken safety frame.
1.5.12 Do not open the hydraulic lines or loosen the hydraulic connections
while the engine is running! Hydraulic fluid under pressure can
penetrate the skin, cause burns, blind, or create other personal injury
hazards.
1.5.13 ALWAYS check all external fasteners at regular intervals.
1.5.14 Keep the machine clean and labels legible. Replace all missing and
hard-to-read labels. Labels provide important operating instructions
and warn of dangers and hazards.
1.5.15 ALWAYS do periodic maintenance as recommended in the Operator’s
Manual.
1.5.16 ALWAYS turn engine off before servicing machine. If the engine has
electric start, disconnect negative terminal on battery.
1.5.17 ALWAYS keep hands, feet and loose clothing away from moving parts.
1.5.18 ALWAYS make sure slings, chains, hooks, ramps, jacks, and other
types of lifting devices are attached securely and have enough weight-
bearing capacity to lift or hold the machine safely. Always remain
aware of the location of other people in the area when lifting the
machine.
1.5.19 Always make sure hose connections have been reconnected back to
the correct fitting. Failure to do so may result in damage to the machine
and/or injury to person on or near the machine.
1.5.20 ALWAYS secure the articulated steering joint using the locking bar
before lifting, jacking, and servicing the machine. The machine halves
could swing together unexpectedly and cause a serious injury.