manualshive.com logo in svg

Wacker Neuson RD 16, Руководство оператора, Страница: 105 / 244

Поделиться
Скачать
Wacker Neuson RD 16 Скачать руководство пользователя страница 105

KE40246P1  6/9/05  3:14 PM  Page 1

NOTICE OF COPYRIGHT PROTECTION

AEM Safety Manuals are protected as a copyrighted work with
ownership duly registered with the Copyright Office, Washington,
D.C. Any reproduction, translation, decompiling or other use of an
AEM Safety Manual, or portion thereof, or the creation of deriv-

ative works based on an AEM Safety Manual, without the prior writ-
ten approval of AEM, is expressly prohibited. Copyright infringe-
ment can result in civil and criminal  sanctions, damages and other
penalties being imposed.

Copyright © 1978 AEM (Association of Equipment Manufacturers)

Former Copyright © CIMA (Construction Industry Manufacturer Association)

Revised 6/02, 9/04

SAFETY ALERT  SYMBOL

This Safety Alert Symbol means
ATTENTION is involved!

The Safety Alert Symbol identifies important safety
messages on machines, safety signs, in manuals, or
elsewhere.When you see this symbol, be alert to
the possibility of personal injury or death. Follow
the instructions in the safety message.

Why is SAFETY important to YOU?

3 BIG REASONS:
• Accidents KILL or DISABLE
• Accidents COST
• Accidents CAN BE AVOIDED

KE40246P2  6/9/05  3:16 PM  Page i

Содержание RD 16





















































































































































































































































Отзывы:

Нет отзывов