Wacker Neuson RD 16 Скачать руководство пользователя страница 59

Страница: 59 / 244

RD 16

Operation

wc_tx001075gb.fm

See Graphic: wc_gr004117

Engine coolant temperature indicator (48)

This warning light illuminates to indicate that the engine has
overheated and the engine will shut down.

NOTICE:

Trace the cause of overheating and rectify the situation

before operating the machine.

Low oil pressure indicator (49)

This warning light illuminates when the ignition switch

(55)

is in the on

position and the engine is not running; it goes out once the engine has
started.

If the light illuminates when the engine is running, it indicates that the
oil pressure is low and the engine will shut down.

Possible causes for the light to illuminate:

•

Oil level is too low.

•

Incorrect oil viscosity for the time of year.

•

Fault in the oil circuit.

Do not operate the machine if the light is illuminated.

Vibration ON indicator (50)

This indicator light illuminates to indicate that the vibration is on.

Low fuel indicator (56)

This indicator light illuminates to indicate that the fuel level is low.

Air filter indicator (57)

This indicator light illuminates to indicate that the air cleaner needs to
be changed.

Glow plug indicator (58)

This indicator light illuminates to indicate that the glow plugs are on.

Parking brake button indicator (59)

This indicator light illuminates to indicate that the parking brake button
is activated.

Battery indicator (60)

This indicator light illuminates when the battery is not charging.

Содержание RD 16





















































































































































































































































Результаты поиска

Содержание RD 16

Отзывы:

Wacker Neuson RD 16, Руководство оператора, Страница: 59 / 244

Результаты поиска

Содержание RD 16

Отзывы: