Wacker Neuson RD 16 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 244

Wacker Neuson RD 16 Скачать руководство пользователя страница 72

Maintenance

RD 16

72

wc_tx001076gb.fm

4.9

Battery

See Graphic: wc_gr002565

Before servicing this machine, make sure the ingnition switch is in the
OFF position and that the battery is disconnected. Attach a “DO NOT
START” sign to the machine. This will notify other personnel that the
unit is being serviced and will reduce the chance of someone
inadvertently trying to start the unit.

Explosion hazard. Batteries can emit explosive hydrogen gas. Keep all
sparks and flames away from the battery. Do not short-circuit battery
posts. Do not touch the machine frame or the negative terminal of the
battery when working on the positive terminal.

Battery fluid is poisonous and corrosive. In the event of ingestion or
contact with skin or eyes seek medical attention immediately.

Dispose of dead batteries in accordance with local environmental
regulations.

To disconnect the battery:

4.9.1

Stop the machine and shut down the engine.

4.9.2

Place all electrical switches in the OFF position.

4.9.3

Disconnect the negative (–) battery cable from the battery.

4.9.4

Disconnect the positive (+) battery cable from the battery.

To connect the battery:

4.9.5

Connect the positive (+) battery cable to the battery.

4.9.6

Connect the negative (–) battery cable to the battery.

WARNING

WARNING

«
...
70
71
72
73
74
...
»

Содержание RD 16





















































































































































































































































Отзывы:

Нет отзывов