Wacker Neuson GP 4000, Руководство оператора

Страница: 33 / 68

wc_tx003406gb.fm
33
GP 4000 Operation
4.8 Grounding the Generator
Location A ground connection (a) is located on the generator frame.
Function This ground connection is used for electrically grounding the generator when
necessary to comply with the National Electrical Code and other federal, state, and
local regulations. For grounding requirements in your area, consult with a qualified
electrician, electrical inspector, or local agency having jurisdiction over electrical
compliance.
„
If the generator is used at a construction site, there may be additional
regulations which must be observed.
„
In some areas, generators are required to be registered with local utility
companies.
„
There is a conductor between the generator (stator neutral winding) and the
frame.
4.9 Operating Heavy Loads
Limit operations requiring the maximum rated output of 4000 W to 20–30 minutes.
For continuous operation do not exceed the continuous rated output of 3600 W.
NOTICE: DO NOT exceed the current limit specified on the control panel for any
receptacle.
wc_gr010579
a