Wacker Neuson GP 4000, Руководство оператора

Страница: 13 / 68

wc_si000791gb.fm
13
GP 4000 Safety Information
Installing as
backup power
Special hazards exist when installing this machine as a backup power supply.
Improper connection of generator to a building’s electrical system can allow
electrical current from the generator to backfeed into utility lines. This may result in
electrocution of utility workers, fire, or explosion.
If connected to a building’s electrical system, the generator must meet the power,
voltage, and frequency requirements of the equipment in the building. Differences
in power, voltage, and frequency requirements may exist and improper connection
may lead to equipment damage, fire, and personal injury or death.
Transporting
and installing
the machine
„
Never allow untrained personnel to operate or service the generator. The
generator set should be set up by a certified electrician.
„
Do not stand under the machine while it is being hoisted or moved.
„
Do not attach equipment to the machine when it is suspended.
„
Always transport the generator in an upright position.
„
Always position and operate the generator on a firm, noncombustible, level
surface.
„
Always make certain the machine is well-grounded and securely fastened to a
good earthen ground per national and local regulations.
„
Always remove all tools, cords, and other loose items from the generator before
starting it.
General
Safety
„
Do not operate the generator when open containers of fuel, paint, or other
flammable liquids are near.
„
Do not operate the generator, or tools attached to the generator, with wet hands.
„
Do not run the electrical cords under the generator, or over vibrating or hot
parts.
„
Do not enclose or cover the generator when it is in use or when it is hot.
„
Do not overload the generator. The total amperage of the tools and equipment
attached to the generator must not exceed the load rating of the generator.
„
Do not operate the machine in snow, rain, or standing water.
„
Do not stand on the machine.
Generator
vibration
Generators vibrate in normal use. During and after the use of the generator, inspect
the generator as well as extension cords and power supply cords connected to it
for damage from vibration.
„
Have damaged items repaired or replaced as necessary.
„
Do not use plugs or or cords that show signs of damage such as broken or
cracked insulation or damaged blades.
WARNING
Backfeed from the generator into the public power distribution system can cause
serious injury or death to utility workers!
f Connections to a building’s electrical system must be made by a qualified elec-
trician and comply with all applicable laws and electrical codes.