Wacker Neuson GP 4000, Руководство оператора

Страница: 42 / 68

wc_tx003407gb.fm
42
Maintenance GP 4000
5 Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson. The use of service parts that are not equivalent in performance
and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
5.2 Periodic Maintenance Schedule
The table below lists basic machine and engine maintenance. Tasks designated
with check marks may be performed by the operator. Tasks designated with square
bullet points require special training and equipment.
Refer to the engine owner’s manual for additional information.
Daily
before
starting
After
first
20 hr
Every
50
hr
Every
100
hr
Every
300
hr
Check the fuel level.
3
Check the engine oil level. 3
Inspect the air filter. Replace as
needed.
3
Check external hardware.
3
Clean the air cleaner element.
1
„
Inspect the shockmounts for
damage.
3
Change the engine oil.
1
„ „
Clean the sediment cup or fuel
strainer.
„
Check and clean the spark plug.
„
Check and adjust the valve
clearance.
„
Clean the fuel tank.
1
„
Check condition of the fuel lines.
Replace when necessary.
„
1
Service more frequently in dusty conditions.